Gastroback advanced pro g, Operating Instructions Manual

Page: 22 / 38

60
4.
Press the -button once. The machine will commence normal pour function, and
-button surround will begin to flash.
5.
When the desired amount of espresso has poured into the cup, press the -button to
stop the pour. The machine will beep twice, indicating it has saved your preferred pour
quantity and exited programming mode.
6. The -button will now pour the saved shot size when pressed, unless reprogrammed,
reset to the default settings, or overridden by the manual function.
prograMMing DouBle espresso
Programming over-rides the preset shot sizes (1oz or 2oz), re-programming the button to
pour your preferred shot size.
1.
Prepare to make a two cup of espresso by following steps 2 to 6 in ›Dual Wall Filters for
Beginners‹.
2.
Place your cup underneath the group head.
3. To begin programming, press the PROGRAM-button once. The machine will beep once and
the program button will begin to flash. This indicates the machine is in programming mode.
4. Press the -button once. The machine will commence normal pour function, and the
-button surround will begin to flash.
5.
When the desired amount of espresso has poured into the cup, press the -button to
stop the pour. The machine will beep twice, indicating it has saved your preferred pour
quantity and exited programming mode.
6. The -button will now pour the saved shot size when pressed, unless reprogrammed,
reset to the default settings), or overridden by the manual function.
reseTTing DefaulT voluMes
To reset the machine to the default one and two shot pour quantities, press and hold the
PROGRAM-button until the machine beeps three times. Release button. This indicates the
machine has returned to its original default settings.
Manual funcTion
The Manual function over-rides the preset shot size for one time only. It does not save the
shot size like in programming mode. Press and hold the -button or -button. Release
the button once sufficient espresso has flowed into the cup.