59
sTep 9 – eXTracTion
• Ensure all the button surrounds on the control panel are illuminated, indicating the machi
-
ne has reached the correct temperature for brewing, and is ready for use.
• Ensure the drip tray and
portafilter are in place.
• Place one or two pre-warmed cups beneath the
portafilter outlet.
note:
pre-Brew funcTion:
When a preset shot size on the front, right hand side of
the machine is selected, the machine will pump water momentarily, followed by a pause then
continue to pump the water through to the grounds in the portafilter. The ground coffee is
moistened by a small amount of water before full extraction. This expands the grinds, resul-
ting in greater pressure build-up to extract all the oils and full flavor from the ground beans.
preseT shoT siZe - one shoT
Press the
-button once. A preset extraction of approximately 1 oz of espresso will be
delivered. A pumping noise will be heard in this operation. The machine will automatically
stop once the preset pour has been delivered.
note:
The amount of espresso extracted in the cup will vary depending on the coarseness
of your grind and grind amount
note:
When using a single shot filter, for optimal flavor, you should only extract appro-
ximately 1 oz. When using a double shot filter, for optimal flavor, you should only extract
approximately 2 oz.
preseT shoT siZe - DouBle shoT
Press the
-button once. A preset extraction of approximately 2oz of espresso will be
delivered. A pumping noise will be heard in this operation. The machine will automatically
stop once the preset pour has been delivered.
note:
Pressing the
-button or
-button during an extraction will immediately stop
the pour.
prograMMing single espresso
Programming over-rides the preset shot sizes (1oz or 2oz), re-programming the button to
pour your preferred shot size.
1.
Prepare to make a single shot of espresso by following steps 2 to 6 in ›Dual Wall Filters
for Beginners‹.
2.
Place your cup underneath the group head.
3.
To begin programming, press the PROGRAM-button once. The machine will beep once and
the program button will begin to flash. This indicates the machine is in programming mode.
Summary of Contents for advanced pro g
Page 25: ...63 ESPRESSO MAKING TIPS...
