31
BEFORE FIRST USE
All parts of the mixer are to be thoroughly cleaned before being used for the first
time (see Section: ›Care and Cleaning‹). Take out the required length of cable from
the cable tidy on the base of the mixer and connect the device to the mains supply.
ASSEMBLING THE GLASS JUG
barlot / beaker
mount
knives/kniveshaft
gasket
1,5 l glass jug
lid
1. Place the gasket over the kniveshaft.
2. Place the kniveshaft with the gasket into the mount.
3. Insert the mount into the base of the glass jug.
4. Lock the mount by turning it carefully clockwise.
5. Place the barlot into the lid and cover the glass jug.
Important:
Please do not remove the safety ring. If you
remove the safety ring, make sure to place it the right
way up, as the appliance will not operate.
ATTACHING THE GLASS JUG
1. Make sure that the ON/OFF-switch is turned to position ›0‹ (AUS/OFF).
2. Now place the glass jar on the motor base. The mixer operates only with moun-
ted glass jar. If you remove the glass jar during operation, the appliance will stop
automatically.
