9.0 SAFETY
9.1 As with all electrical equipment please be careful! If used
incorrectly electrical equipment can cause fire, electric
shocks and personal injury, so please follow the instructions
in this manual carefully to minimise the risk of accidents.
9.2 Your power supply should be earthed, fitted with a circuit
breaker, and compatible with providing 700 Watts.
9.3 Switch off the sealer before unplugging, and keep it
disconnected when not in use.
9.4 Avoid any contact with water, either directly on the sealer
itself, or indirectly such as wet hands.
Be aware that the pressure-plate will remain hot for
some time after the sealer is switched off.
10.0 MAINTENANCE
10.1 Clean the sealer after use with a damp cloth using mild
detergent. Any contamination on the pressure-plate
should be removed with a soft sponge and mild detergent
after
the pressure-plate has cooled down. Do not flush
the sealer with water, or use harsh detergents.
10.2 Tray-mounts can be cleaned by hand with a soft sponge
and mild detergent. (They must NOT be cleaned in a
dishwasher.)
