20
Data Control
This sub-menu has the following topics and are accessed by pressing the key.
Clear data
Data transfer
Logging settings (only accessible in continuous logging mode)
Memory used
single/cont.
In most of these menus the third line shows current settings or values and also
ü
or X on the middle
line.
Data Control - Clear Data
Enter this by a press.
Display
Clear Data
Back
All data
X
Note: An X or
ü
will be required following usual convention on the 2
nd
line.
Use the up or down scroll keys for other end tree selections:-
Last data
X
Data Control – Data Transfer
Display
Data control
Back
Data Transfer
X
display No. of files
ü
Note: An X or
ü
will be required following usual convention on the 2
nd
line.
When Data is being transferred, the X changes to a
ü
and then the Gas Check changes to a blank
display but with the words 'Data transfer' for the duration of
the transfer or time-out.
