5
© 2022, JUN-AIR
We reserve the right to make any alterations which may be due to any technical improvements
Printed in the USA
120 Basic Compressor User Guide
6190761 (Rev A)
INSTALLATION
Your JUN-AIR compressor is easy to operate . Observe the
instructions and you will get many years service from your
compressor .
•
Visually inspect unit for shipping damage, contact your supplier
immediately if you think the unit may have been damaged .
•
Check that the performance of the compressor matches the
actual air consumption, please refer to Technical Specifications .
•
Check that the rating plate of the compressor corresponds with
the electrical voltage offered and check that fusing is adequate .
Placing
Place the compressor in a dust-free, dry and cool, yet frost-free room .
Sufficient cooling from the surroundings is important .
•
Ambient temperature: 0°C to 40°C, 32°F to 104°F
•
Relative humidity: Max 90%
Mount the two distance bolts (1) on the back of the cabinet to ensure
sufficient ventilation .
Installation
•
Mount the drain bottle (2) visibly outside the cabinet and mount
the hose at the back of the cabinet (3) .
•
Connect the cable at the back of the cabinet (5) .
•
Plug the compressor into a standard outlet switch .
•
Connect equipment at the back of the cabinet (4) .
•
The front wheels are delivered with brakes . Brake the wheels
before starting the compressor (6) .
Thermo Switch
The fans are controlled by a Stego thermo switch adjusted to 30°C
from the factory – do not alter this setting . Check that the setting is
correct and adjust if necessary .
The fans will start when the temperature inside the cabinet exceeds
30°C and will run continuously until the temperature drops below
30°C .
