Gaspardo PRIMAVERA 400, Use And Maintenance

Page: 65 / 174

USE AND MAINTENANCE
65
ENGLISH
g
cod. G19503100
4.3 LEVELLING BAR
The purpose of the levelling bar is to lightly level the surface of
the field. To adapt it to different ground conditions, its inclination
can be adjusted by varying the position of pin (E) Figure 55.
The bar is adjusted correctly if it works with a small amount of
soil during use. A heavy load would cause the structure to collapse.
4.0 OPTIONALS
4.1 TRACTOR WHEEL TRACK ERADICATORS
The wheel track eradicators should be placed on the same line as
the tyres of the tractor (Fig. 53).
1) Wheel track eradicator for track width up to 180 cm.
2) Wheel track eradicator for track width from 190 up to 260 cm.
The working depth of the wheel track eradicators (1) is set by
varying the position of pin (A, Fig. 53).
4.2 FRONT PREP UNIT (mod. 500-600)
The prep unit, attached to the front of the planter, is suitable for
seed-planting on roughly tilled ground.
The equipment is attached to the planter by means of points (B) in
Figure 54.
The working depth of the prep unit parts is set by varying the position
of pin (C) figure 54.
WARNING: During road transport, stop the preparation unit
using the supplied pin which has to be fitted into the existing
holes (D, Fig. 54).
fig. 53
fig. 54
B
C
D
A
1 2
fig. 55
E