Gaspardo MCE 6000, Use And Assembly Instructions / Spare Parts

Page: 8 / 72

USE AND MAINTENANCE
ENGLISH
22
-
cod. G19502283
5.4 PROGRAMMING
>
d =
longitudinal distance between one seed and the next (cm);
L = row spacing (cm);
S = sensitivity;
" x X;__[
Š‰)"‹&>
;[ = ŠV ‹ XŠ+‹[
until the display shows “d xx.x”.
D
<[  Š—‹ Š%‹ X Š`‹ Š^‹[
decrease the value.
F
E
{[ (
press the “Programming” button.
4) The display will show “L xxx”; proceed as in points 2 and 3.
5) The display will now show “S xx”; proceed as in points 2 and
3.
6) The display will now show “C xxx”; proceed as in points 2 and
3 to exit programming and start working.
(d) CALIBRATING THE SEED PLANTING DISTANCE
Enter the seed planting distance in cm, according to the value
set on the seed drill.
: 1,0÷40,0 cm
Step : 0,1
Default : 10,0
The value must be changed every time that a new seed planting
distance is set on the seed drill.
(L) HOW TO SET THE WORKING WIDTH BETWEEN ROWS
^ & X(>
4(’ƒ ’ƒ[
: 30÷250 cm
Step : 1
Default : 75
(S) HOW TO SET THE ROWS ALARM SENSITIVITY
Enter the sowing tolerance. The value which is to be program-
NORMAL Mode (programmed in the factory, S = 10)
Normal Mode is selected when the sensitivity value program-
med « S ˜ ; ƒ_X™;š
highest sensitivity).
Select Normal Mode “
and beet seeds using standard photocells or to control planting
seeds.
Planting sensitivity is proportionally linked to the maximum
Š‹
without the monitor signalling the alarm: the higher the sensi-
tivity value programmed, the more seeds will have to be lost
: 1÷50
Step : 1
Default : 10
Recommended :
- MAIZE / SUNFLOWER / BEETS ...... SE = 30 ÷ 40
- SOYA ................................................ SE = 40 ÷ 50
“PASSAGE” MODE
« Passage Mode » is selected when the sensitivity value pro-
grammed « S » ranges between T1 and T8.
For instance, select «Passage Mode˜
rape seeds using standard photocells.
Planting sensitivity in «Passage Mode» corresponds the max.
time value (no pulses on single or multiple rows) beyond which
value is the same required to reset the alarm. Programmable
; † -
lowing times:
T1= 1,0 seconds T5= 3,0 seconds
T2= 1,5 seconds T6= 3,5 seconds
T3= 2,0 seconds T7= 4,0 seconds
T4= 2,5 seconds T8= 4,5 seconds
For instance ›{˜
|ˆV‰)^)Œ^"^„^+
2 seconds
2 seconds.