![Gaspardo M 250 Use And Maintenance Download Page 23](http://html2.mh-extra.com/html/gaspardo/m-250/m-250_use-and-maintenance_3726354023.webp)
23
cod. 19501112
ENGLISH
g
1.0 INTRODUCTION
This booklet describes the regulations for use, maintenance for
seeding machine.
This booklet is an integrating part of the product, and must be
kept in a safe place for consultation during the whole life span of
the machine.
ATTENTION
The customer should instruct personnel on accident risks, on
the operator safety devices provided, on noise emission risks
and on general accident prevention regulations provided for by
the international directives and by the law in the country in which
the machines are used.
In any case, the machine should be used exclusively by skilled
operators who will be held to follow scrupulously the technical
and accident-prevention instructions in this manual.
It is the user's responsibility to check that the machine is operated
only in optimum conditions of safety for people, animals and
property.
The product complies with the following European Standards:
- 98/37 CE Machine Directive that abrogates and includes
Directives 89/392 EEC, 91/368 EEC, 94/44 EEC and 93/68 EEC.
- 89/336 EEC (Concerning the bringing together of member
countries' regulations on electrical material destined for use
within certain voltage limits).
For machine conformity the following standards have been used:
- EN 292-1:1992 (Safety of machinery) Basic concepts, general
design principles. Terminology and basic methodology.
- EN 292-1 A/1:1992
- EN 292-2:1992 (Safety of machinery) Basic concepts, general
design principles. Technical specifications and principles.
- EN 294:1993 (Safety of machinery) Safety distances to prevent
danger zones being reached by the upper limbs.
- EN 982:1997 (Safety of machinery) Safety requirements
regarding systems, and their components, for hydraulic and
pneumatic drives.
- EN 1553:1999 (Agricultural machines) Self-propelled
agricultural machines, mounted, semi-mounted and towed -
Common safety requirements.
- pr EN 144045 (Planting units - Safety) document CEN/TC 144
WG 3 n° 347 - May 2000 edition.
1.1 DESCRIPTION OF THE SEEDER
This farming implement, can only be operated by a farming tractor
equipped with lift unit and universal three-point hitch.
The seeder is suitable for stand-alone use on tilled soil, or
combined with equipment for the soil working (harrow, tiller, etc.).
It is suitable for sowing cereal:
wheat, barley, rye, oats, rice.
For minute and forage seeds:
rape, clover, alfalfa, rye-grass.
For coarse seeds:
soya, peas.
The seeds are deposited in the soil by means of furrower tools,
cutter, single or double disk, and are distributed continuously by
a toothed roller for each row. The quantities to be distributed is
regulated by means of a cam variator (gear), whose motion
derives from the wheels both being adherence driving wheels.
The arms of the furrowing tools, independent of each other, di-
spose of a wide margin of oscillation to adapt to the surface of
the ground.
ATTENTION
The seeder is suitable only for the uses indicated. Any other
use different from that described in these instructions could
cause damage to the machine and represent a serious hazard
for the user.
Regular operation depends on the correct use and adequate
maintenance of the equipment. It is advisable therefore to observe
scrupulously what is described in order to prevent any
inconveniences that could prejudicate proper operation and
duration.
It is just as important to keep to what is described in this booklet
since
the Manufacturer declines all responsibility due to
negligence and non-observance of these rules.
At any rate the Manufacturer is available to assure immediate
and accurate technical assistance and all that may be necessary
for the improved operation and better performance of the
equipment.
Summary of Contents for M 250
