User Manual
X45
Version 1.0/2019
Copyright © 2019 by Xicoy Electrònica S.L. All rights reserved
Page
5
Warranty
The warranty duration for this Xicoy X45 engine is two years from date of completed purchase, or 25 running
hours, whichever comes first.
Warranty is valid solely for the original 1
st
owner and is non-transferable upon resale.
Warranty includes all supplied parts and is limited to manufacturing defects only.
Shipment costs
forth and back, including packing and relevant customs fees
are not covered
by the
warranty, and will be at owner’s expense.
Damage or defective operation covered under warranty terms will be repaired and tested at no cost to original owner
(other than shipping expenses). Repairs not covered under the terms of warranty will be carried out by Xicoy
Electronica SL or their appointed agent after agreement of costs.
Before
returning the engine or ancillary equipment for service or repair, please contact first your local dealer or Xicoy
Electronica SL central office to agree action and costs.
Do not ship before contacting Xicoy Electronica first
.
. Shipping anything from outside the EU without appropriate
documentation will introduce delay and costs at customs borders.
Please do not disassemble this engine or accessories (pump etc.). You will breach your warranty agreement and will find
it an unfamiliar sophisticated and precision assembly which you may not be able to reassemble without considerable
difficulty and specialist equipment.
Simply slackening the compressor nut on the engine will lose the delicate balance condition of rotor without which the
engine may not run without sustaining damage to the rotating assembly.
This warranty is voided if any one or more of the following conditions applies. In such a case Xicoy Electronica SL will
accept no responsibility for any damage or other consequence caused by engine operation.
1.
The product has been subject to any form of operation using incorrect fuel, oil or fuel/oil mix.
2.
The product is, or appears to be, crash damaged, the fuel pump is blocked due to particle ingestion,
electronics or pump-drive are flooded with fuel or water ingress, connection leads are cut or show loss of insulation
and/or short circuit or reverse polarity on battery or engine cable connection.
3.
Unauthorized maintenance and/or modifications have been made to any part of the product; including
unlocking of the ECU and changing any of the manufacturers settings, or any items supplied has or appears to have
been disassembled.
4.
Parts show damage by ingestion of foreign object (wires or pipes, sand, grit and small abrasive particles,
water or fluids, dry powder from extinguisher, etc.).
5.
The engine has or appears to have been operated incorrectly or not in accordance to this operators manual.
6.
The product has been or appears to have been misused, neglected or inadequately maintained.
7.
The engine or fuel pump has or appears to have suffered damage or blockages in the fuel system due to being
run with unfiltered or contaminated fuel.
