Safety
6
General Safety
Whilst great care and every effort have been
made by Gason to provide a machine to the
highest possible safety standards, tillage imple-
ments by their nature are potentially danger-
ous.
Read and understand this manual and the man-
ual of the tractor towing the implement. Know
your machine and its limits and operate within
them. If in doubt, ASK!
Be Prepared
In the event of an emergency it is best to be
prepared. Gason recommend whilst operating
the Implement, a fire extinguisher and first aid
kit should be readily available in the event that
they might be required.
Safety Decals
All Gason Tillage Implements are provided with
a complete set of decals which include im-
portant safety information and are required to
ensure the machine complies with the relevant
work safe regulations. Every effort should be
made to ensure the decals are legible at all
times. Any decal which can be seen to be worn
or can no longer be read should be replaced.
For a detailed list of Decals and their positions
on the machines refer to the Parts section of
this manual.
Safety Rules
Danger: Do not operate the tractor or Im-
plement until you have fully read and com-
pletely understand this operator’s manual, your
tractors operator’s manual, and all safety mes-
sages found within these manuals, on the prod-
ucts, or other included material.
Warning: Ensure all operators are properly
instructed on the operation of the machine and
position of controls. Do not allow anyone to oper-
ate the machine without proper instruction.
Warning: Know your controls and how to
stop the machine quickly in an emergency.
Warning: Keep hands and body away
from pressurized lines. Wear safety glasses to
protect eyes. Hydraulic fluid (oil) under pressure
can easily penetrate the skin, ensure all opera-
tors and service personnel are aware that if hy-
draulic fluid (oil) penetrates the skin it will need
to be surgically removed. Failure to do so may
result in serious injury or death.
Danger: Stand clear when folding or un-
folding wings.
Caution: Check that all hardware is tight
and properly installed. Refer Assembly Torque
table.
Caution: Ensure the implement is
properly attached, adjusted and in good work-
ing order before operating the machine.
Caution: Remove any debris that has ac-
cumulated on the implement or tractor.
Danger: DO NOT allow persons to ride on
machine during operation or transport.
Summary of Contents for NT8000
