DX4040 INSTRUCTION AND OPERATING MANUAL (E2.04)
WARNING. READ BEFORE USING ANALYSER
To avoid possible electrical shock or personal injury, follow these guidelines:
- Use the analyser only as specified in this manual or the analyser could be irreversibly
damaged.
- Do not use the analyser or probe or external AC/DC power supply unit
1
or battery if
they appear damaged, or if they operate incorrectly. If in doubt, have the analyser
serviced by trained service personnel.
- Always use the proper original Gasmet parts, and respect Gasmet suggested
measurement conditions.
- Do not apply an input AC voltage to the external AC/DC power supply unit different
than what indicated on the external AC/DC power supply unit name plate.
- Always use a proper earth ground under external AC/DC power supply unit use.
- Do not use the analyser in EX rated areas.
- The equipment
2
must not be operated in wet conditions.
- Do not drop the analyser.
- The DX4040 Instruction and Operating Manual should be read and understood before
operating your unit.
Symbols
AC (Alternating Current)
DC (Direct Current)
Important Information; refer to manual
WEEE symbol (Waste Electrical and
Electronic Equipment Directive)
Conforms to European Union directives
Canadian Standards Association
1: AC/DC PSU will later refer to external AC/DC power supply unit.
2: Equipment refer to the external AC/DC power supply unit, the battery and the
analyser.
3
