Gasmate P0100 Series Instructions Manual Download Page 1

Page: 1 / 12

02696 06/10

Important:

Retain these instructions for future use.

Gasmate

is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au

Aber Ltd - Hamilton, N.Z.

www.gasmate.co.nz

Pizza Oven with Light

P0100 Series

FOR OUTDOOR USE ONLY

• Deluxe outdoor oven for versatile cooking -

from cooking pizzas with a delicious wood fired

flavour to a beautifully cooked roast dinner

•   Cooks up to 3 pizzas at a time
•   Convenient electronic ignition
•   Cool touch heat resistant handle
•   Includes food safe ceramic pizza stone

•   Powerful 22MJ/h stainless steel burner
•   Large viewing window with temperature gauge
•   Easy clean vitreous enamel interior
•   AGA certified
•   Propane gas
•   Certified for conversion to natural gas

Model No. PO110

Model No. PO106

Summary of Contents for P0100 Series













Search results

Summary of Contents for P0100 Series

Reviews:

Related manuals for P0100 Series

Brands by name

Popular brands

Gasmate P0100 Series, Instructions Manual

Search results

Summary of Contents for P0100 Series

Reviews:

Related manuals for P0100 Series

Brands by name

Popular brands