12
13
12
12
CLEANING
A build up of oil may occur if the Rangehood and baffle
filters are not cleaned properly and regularly. Some
discolouration of the baffle filter may occur if cleaned in
the dishwasher.
RANGEHOOD SURFACES
Clean periodically with hot soapy water and a clean
cotton cloth. Do not use abrasive detergent or steel
wool/scouring pads which will scratch and damage the
surfaces.
For heavier deposits, use a liquid degreaser.
After cleaning, you may use nonabrasive stainless steel
polish/cleaners to polish and buff the stainless lustre.
Always rub lightly, with a clean cotton cloth and with the
grain of the stainless steel.
Note: Never wipe or rub across the grain as this will
damage the surface finish.
BAFFLE FILTERS
The baffle filters fitted by the factory are intended to
filter out residue and grease from cooking. They are
required to be kept clean and should be cleaned after
every 30 hours of use or more often if required or after
heavy cooking.
Note: Always turn the Rangehood power point off
before removing filters.
To Remove
Lift latch and gently pull down front of baffle filter and
remove.
To Clean
1. Use warm soapy water and a soft cloth or put into
dishwasher on a ‘normal’ cycle.
2. Thoroughly clean and wipe down the inside of
Rangehood canopy.
To Fit
1. Position the rear of the baffle filter into the 2 slots.
2. Gently rotate the baffle filter into position, lift latch
and push into place and release latch.
Summary of Contents for GR1000
Page 14: ...14 14 SPECIFICATIONS 30...
