10
11
10
10
INSTALLING - WALL MOUNT RANGEHOODS
Mounting bracket is attached and part of the medium
rangehood motor cover.
Note: Rangehood must be level, if not rangehood will
not operate correctly.
1. Using a tape measure mark the top mounting holes,
refer below, above cooking surface. This line should
be level.
2. Using a tape measure mark the bottom mounting
holes, refer below, down from the line discussed in
item 1. This line should be level.
3. Find the centre of the BBQ cooking surface and
using a plumb bob, mark this centre on the above
lines discussed in Item 1 & 2.
4. Mark the top mounting holes on the line discussed
in Item 1. These marks should be either side of the
centre mark discussed in Item 3, refer below.
5. Mark the bottom mounting holes on the line
discussed in Item 2. These marks should be
either side of the centre mark discussed in Item 3,
refer below.
6. Your rangehood is very heavy. Please use suitable
fixings and hole size for this weight.
Medium – 42Kg
7. If unsure of which fixings please discuss with your
hardware stockist or rangehood installer.
8. Using two people, lift rangehood into place and
secure to the wall using selected hardware. Ensure
rangehood is level.
Summary of Contents for GR1000
Page 14: ...14 14 SPECIFICATIONS 30...
