background image

2

3

2

2

WARRANTY TERMS & CONDITIONS

This warranty is not transferable to a subsequent 
purchaser if the product is sold by the original 
purchaser during the warranty period. 
If a warranty fault appears within the warranty period, 
S.G.A. reserves the right to replace or repair the 
product.
In the event that S.G.A. chooses to replace the product, 
this original warranty will expire at the original date.
If the product includes various accessories or 
components, only the defective accessory or 
component will be replaced or repaired.
S.G.A. Reserves the right to replace defective parts 
of the product with parts and components of similar 
quality, grade and composition where an identical part 
or component is not available.
Products presented for repair may be replaced by 
refurbished products of the same type rather than being 
repaired.  Refurbished parts may be used to repair the 
products.
To make a warranty claim, first contact S.G.A’s 
Customer Service Line on the contact number below.
The purchase receipt for this product is to be retained 
and must be presented if making claim under the terms 
of this S.G.A. warranty.
Warranty repairs are free of charge, provided the 
product is delivered to our Service Department at  
33-35 Lionel Road, Mt Waverley, Victoria, 3149  
or to one of our Authorised Service Agents.
If a warranty fault is found the freight cost will be 
credited to the owner. If no fault is found the product 
will be returned and any costs associated with the 
service will be charged to the owner.
Products sent freight forward will not be accepted. In 
most cases the defective accessory or component only 
will need to be returned.  The product or part of the 
product being returned must be adequately protected 
in a box.
S.G.A. will not be responsible for any in-transit loss or 
damage.

For any queries or assistance call

Customer Service

Australia Only

1300 174 876

Hours of operation: 

Monday to Friday 8am - 5pm EST

Do not return to place of purchase

.

This warranty does not apply to any defect, 
deterioration, loss, injury or damage occasioned by or 
as a result of misuse or abuse, negligent handling or 
storage, normal wear and tear or if the product has not 
been installed and used in accordance with S.G.A.’s 
instructions, recommendations and specifications or if 
the product has been subjected to abnormal conditions.   
The warranty does not apply to blockages caused by 
insects or living organisms, as well as non-operating 
butterfly baffles or incorrectly installed ducts.
The warranty is void if there is evidence of the product 
being tampered with by unauthorised persons.  
The warranty does not extend to installation or 
disconnection costs.
Our goods come with guarantees that cannot be 
excluded under the Australian Consumer Law.  You 
are entitled to a replacement or refund for a major 
failure and for compensation for any other reasonably 
foreseeable loss or damage.  You are also entitled to 
have the goods repaired or replaced if the goods fail 
to be of acceptable quality and the failure does not 
amount to a major failure.   The benefits of this warranty 
are in addition to any rights and remedies imposed by 
Australian State and Federal legislation that cannot be 
excluded.  

Product Approved For Outdoor Use Only

For warranty claims, service, spare parts or products 
information in Australia, please call SITRO GROUP 
AUSTRALIA Pty Ltd on the Customer Service Line 1300 
174 876.
A receipt or proof of purchase is required and must be 
kept for your records.

CONTACT DETAILS

Sitro Group Australia Pty Ltd 
33-35 Lionel Road, Mt. Waverley 
Victoria 3149, Australia 
Tel (+613) 9543 9533 
Fax (+613) 9543 9839 
[email protected]

Summary of Contents for GMHIS

















Reviews: