5
4
ASSEMBLY INSTRUCTIONS
For best results and your safety, please follow the
instructions carefully. DO NOT modify this product in any
way as the distributor will accept no liability for improper
use.
Remove all package material (including anti-vibration
object on the lamp) and check the heater, supply cord
and plug for signs of damage.
RESET OPERATION
• Press the Reset button, the power will be adjusted
accordingly (Low, Middle, High, ON/OFF)
• Press the Reset button for at least 4 seconds, the
heater will restore to factory settings
1.
Lay the heater onto its side
2.
Attach the base plate with the three screws
provided
3.
Stand up the heater
Pay attention that the heater is not used in excessively
windy locations.
Ensure that the place it is to be used is level, secure and
firm.
Plug in to the power point and use the remote control to
turn on and test as shown on next page. Then observe
for the first 10-15 minutes that the heater works trouble-
free.
If you do not use for an extended period, please remove
batteries from the remote.
Step 3
Step 2
1.4M
6.0M
COVERAGE AREA
