Gasmate GM135-017, Installation, Operation And Maintenance Instructions

Page: 4 / 8

5 4
ELECTRICAL DATA MOUNTING AND OPERATING
INSTRUCTIONS
For best results and your safety, please follow the
instructions carefully. DO NOT modify this product
in any way as the distributor will accept no liability
for improper use.
MOUNTING THE HEATER
Step 1
Ensure umbrella is secure and stable by using a
suitable umbrella base.
Step 2
Place heater on the umbrella pole.
Step 3
Slide heater up the umbrella pole to the desired
height (no less than 1.8m) and tighten thumb
screw.
Step 4
Bring mains lead through hole in table, contain
lead around umbrella pole and connect into base
of heater.
Step 5
Connect plug on mains lead into an RCD protected
socket or into an outdoor IP23 weatherproof
socket.
IMPORTANT
This product is fitted with a sealed electrical
connection plug that is compatible with the heater,
the mains supply for New Zealand and meets
the requirements of international standards. This
heater must be connected to a supply voltage that
is equal to that stated on the rating label.
If the mains connection plug or power cord
becomes damaged it must be replaced with a
complete assembly that is identical to the original,
and this must be replaced by an authorised
service centre.
Always follow the New Zealand requirements for
connection to the mains supply. If in doubt always
consult a qualified electrician.
Technical Specification
Model
GM135-017
Voltage:
220V-240V~ 50Hz
Input Wattage:
1500W
Unit Weight:
3.5Kg
IP Rating:
IPx3
Heater specifications can be found on the data
label.
THIS PRODUCT SHOULD ONLY BE USED
UNDER AN UMBRELLA AND MUST NOT BE
USED OR LEFT IN WET CONDITIONS.
IMPORTANT