Gasmate EH714, Instructions Manual

Page: 4 / 12

5 4
Heater EH714
Voltage 220-240V AC 50Hz
Input Wattage 2000-2400W
Unassembled unit weight 50Kg (inc. base)
Fully assembled unit weight 150Kg
IP Rating IP 24
Lamp
TA: 20 - 25°C
MAX 6W
Remote control batteries
(not supplied)
2 x AAA
Heater specifications can be found on the data label.
IMPORTANT
This product is fitted with a sealed electrical connection
plug that is compatible with the heater, the mains supply
for Australia and meets the requirements of international
standards. This heater must be connected to a supply
voltage that is equal to that stated on the rating label.
If the mains connection plug or power cord becomes
damaged it must be replaced with a complete assembly
that is identical to the original, and this must be replaced
by the manufacturer or an authorised service centre
or similar qualified persons in order to avoid a hazard.
Always follow the Australian requirements for connection
to the mains supply. If in doubt always consult a qualified
electrician.
Technical Specification
ELECTRICAL DATA
COMPONENTS & ACCESSORIES
COMPONENTS
No. Part Name
1 Heater Head
2 Closed End Nut M8
3
Spring Hook
4 Screws M8*50
5 Screws M8*55
6 Tube Cover
7
Cord Brushing
8 Upper Tube
9 Female Cord Connector
10 Tube Connector
11
Screws M6*12
12 Curled Tube
13 Upper Rotary Tube Connector
14
Middle Tube
15
Spring Washer
16 Base Cover
17 Screw M4*20
ACCESSORIES
Accessory Name Qty
Spring Hook 1
Screws M6*12 10
Water Tank 4
Spring Washer M6 4
Foot 4
Remote Control 1
Floor Bracket Mount 1
Floor Bracket 1
Floor Bracket Concrete
Expansion Bolt
1
No. Part Name
18 Heater Bracket Plate
19 Lower Tube
20 Base
21 Water Tank
22 Spring Washer
23 Male Cord Connector
24 Foot
25 Power Cord & Plug
26 Junction Board
27 Control Panel
28 Remote Control
29 Floor Bracket Mount
30 Floor Bracket
31 Floor Bracket Concrete Expansion Bolt
32 Heater Steel Plate
33 Screw knob