background image

IMPORTANT SAFEGUARDS

To reduce the risk of personal injury or damage to 

property, follow basic safety precautions when using 

this product, including the following:

READ THESE INSTRUCTIONS CAREFULLY BEFORE USING 

THE PRODUCT.  KEEP THE INSTRUCTIONS HANDY FOR 

FUTURE REFERENCE.

Important:

  Always operate the Product from a power source 

of the same Voltage, Frequency and Rating as indicated on the 

Product Identification Plate.

•  Close supervision is necessary when any Electrical Product  

 

is used or operated near children or infirm persons;  

 

DO NOT leave the Product unattended when in use; young  

 

children should be supervised to ensure that they  

 

 

DO NOT play with the Product.

• 

DO NOT

 operate any product which has been/or appears    

 

damaged in any manner or after the Product malfunctions,  

 

or is dropped.  Return the complete Product immediately to  

 

your place of purchase.

•   If it is necessary to use an Extension Cord with this 

Product, prior to its use, make sure the extension Cord is 

safe to use, capable of handling the electrical load of the 

Product (refer to Product Identification Plate) and has been 

checked and tested by your electricity supplier or qualified 

technician.

•  To avoid becoming entangled in the cord, 

NEVER

 lay it  

 

 

through or along a walkway or thoroughfare.

• 

DO NOT

 use this heater with a programmer, timer or other  

 

 device that switches the heater on automatically, since 

a fire risk exists if the heater is covered or positioned 

incorrectly.

•   The glass fireguard of this heater is intended to prevent 

direct access to the heating elements and must be in place 

when the heater is in use.

 

 CAUTION:

  

DO NOT

 

use

 in the immediate 

surrounds, 

or leave

 this Product in a position 

where it may be 

pulled or fall

 into a Bath, Shower, 

Sink, Swimming Pool or Trough etc.  There is a 

danger of Electrocution under these conditions 

even with the Product Switch in “OFF” position.  

Switch “OFF” at the Socket Outlet and 

remove

 the 

Plug when not in use.  If the Product accidentally 

falls into water, 

UNPLUG it immediately; DO 

NOT REACH INTO THE WATER. Important:

  Prior 

to reconnecting the Power Supply, the complete 

Product should be inspected by a qualified 

 

 WARNING:

 To avoid overheating the Power Supply 

Cord, completely unwind all the cord, including from 

the cord storage area of the heater, if fitted.

 

 CAUTION:

 To reduce risk of electric shock, 

DO 

NOT IMMERSE

 the Product in any liquid, or use 

the Product near baths, basins, swimming pool, 

shower area or other vessels containing water or 

other liquids, or when 

standing in or on

 damp 

or wet surfaces.  If any Electrical Product falls into 

water, 

UNPLUG it immediately; DO NOT REACH 

INTO THE WATER.  Do not immerse or expose

 

the Flexible Cord or Plug to rain, moisture or any 

liquid.  Important:

  Prior to reconnecting to the 

Power Supply, the Product should be inspected by a 

qualified technician.

•  Always arrange the Cord so that it cannot be pulled or  

 

 

tripped over.

• 

DO NOT

 operate this Product immediately below an  

 

 

electrical Socket Outlet.

•  Avoid operating the Product on long pile carpet or uneven   

 

surfaces.  Use only on flat, level and stable surfaces. 

• 

DO NOT

 operate this Product in the presence of explosive   

 

and/or flammable liquid or fumes such as where aerosol    

 

(spray) Products are being used or where Oxygen is being   

 

administered.

•  Avoid leaving the Product unattended when in use.

•  Switch OFF and UNPLUG from Power Outlet when not in    

 

use, allow to cool before shifting the Product from one  

 

 

location to another, and before cleaning.

• 

 DO NOT

 disconnect the Product from the Power Supply 

by pulling on the Cord.  Never move, carry or hang the 

Product by the Cord.

•   When storing the Product, gently wind the Cord around 

the Cord Wrap if provided, otherwise loosely coil the cord.  

Avoid wrapping the Cord around the Product.

•   

DO NOT

 operate or place any part of this Product on 

or near any hot surfaces such as a gas flame, electric 

element, or in a heated oven, or let the Cord hang over the 

edge of a table or bench.

•  Avoid touching hot surfaces, use Handles or Knobs.

•  Avoid contacting moving parts.  Keep hands, hair, and  

 

 

clothing, well away from the Product while it is in  

 

operation.

•   

DO NOT

 use the Product for other than its intended use as 

described in these instructions.  This Product is intended 

for Normal Domestic Household Use only.  The use of 

accessory attachments other than those recommended by 

the manufacturer may cause safety hazards.

 

 CAUTION:

  This Product should not be used/

operated in a confined space.  Always use/operate 

this Product well away from walls and curtains.  A 

fire may occur when this Product is in operation, 

if it is covered, or is close to flammable materials, 

such as curtains, drapes or wall coverings, etc.

Summary of Contents for EH305









Reviews: