3
2
BEFORE FIRST USE
UNPACK THE PRODUCT
• Carefully unpack the Product making sure
you keep all the packing material until all the
parts of the Product have been checked and
the Product has been used. We recommend
keeping all the packing material in a safe place
for re-use at any time you wish to repack the
Product for storage.
• To remove any dust that may have accumulated
during unpacking, simply wipe the exterior
of the Product with a clean, soft, slightly
dampened (not wet) cloth, then allow to
thoroughly dry. Do not use any abrasive
cleaners as they may scratch the surface.
SERVICE & SAFETY
• This Product is shipped to you in a factory
sealed carton. Should the Product be damaged,
dropped, or malfunctions in any way, or its
Flexible Cord is damaged, contact customer
service or return to place of purchase.
• Always operate the Product as described in
these instructions.
• The power supply must be supplied through a
residual device (RCD) having a tripping current
not exceeding 30mA.
• Only connect this heater to a socket-outlet
having an earthing contact.
• DO NOT use the heater during inclement
weather, rain or damp conditions.
• DO NOT operate the heater with a damaged
cord or plug, or if heater malfunctions, or has
been damaged in any manner.
• Never operate this heater when your are tired,
drinking alcohol, taking drugs or if taking
medication that causes drowsiness.
• This heater is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the heater by a person
responsible for their safety.
• Pets and animals must be kept away from the
work area so as to avoid tripping dangers.
• Always arrange the Cord so that it cannot be
pulled or tripped over.
• Never modify this heater as damage and injury
may occur, and this will void your warranty.
• Check for damaged parts before operating this
heater.
• Keep power cord away from heat, oil, solvents
and sharp edges.
• Check power cord for signs of damage before
each use. If damaged do not use.
• Power cord must only be replaced by an
authorised service facility.
• Use only a ‘3’ core (earth pin) extension cord
with this heater.
