4
IMPORTANT: Before connecting and
disconnecting barbecue to gas source, make sure
burner controls are in ‘OFF’ position. Check that
the seals between the appliance and the gas
source are in place and in good condition before
connecting the propane canister or cylinder. Do not
use this appliance if it has damaged or worn seals.
Check performance of burner prior to installing
barbecue plates. Do not smoke when attempting
to ignite barbecue. Never use volcanic rock, heat
beads or other material. Always use protective
gloves when handling hot components.
If there is a leak on your appliance (smell of
gas) immediately attempt to turn off the cylinder
valve. Remove the appliance to a well ventilated
location away from any ignition source. Only
check for leaks outdoors using soapy water. DO
NOT try to detect leaks using a flame.
Gas Source Use & Safety
Your barbecue is designed for use with a Propane Gas
disposable canister certified to EN417 or DOT39 or for use
with 9kg LPG cylinder with approved connection. It may be
hazardous to attempt to fit other types of gas containers.
Always ensure the barbecue is kept away from flammable
materials and the gas canister/cylinder clear of any heat
source. When changing over from an empty gas canister/
cylinder to a full one make sure this procedure is carried
out in a well ventilated location, preferably outside, away
from people and away from any sources of ignition; such as
naked flames, pilot flames, electric heaters/equipment.
If this information is not followed exactly a fire
causing death or serious injury may occur. Do not
store a spare gas canister/cylinder under or near
this barbecue. This barbecue is only to be used
and stored outdoors.
GENERAL ASSEMBLY
Fitting the Regulator
The gas regulator screws into the venturi pipe located at
the side of the BBQ. Screw in hand-tight then tighten gently
with an adjustable spanner. You will still be able to rotate
the regulator.
You are now ready to attach the Propane Fuel Canister
or hose to attach to an LPG Cylinder.
