background image

5

4

 WARNING

Failure to comply with these instructions 

could result in a fire or explosion which could 

cause serious bodily injury, death or property 

damage.
Accessible parts may be very hot.
Keep young children away.
Any modifications to this appliance may  

be dangerous.
Do not move this appliance during use.
Turn off gas supply at the cylinder after use.
Read instructions before using the appliance.
Parts sealed by the manufacturer or their  

agent must not be manipulated by the user.
This appliance is only to be used and stored 

outdoors.
Never operate this appliance without a 

regulator.
Do not test for gas leaks with an open flame
If this information is not followed exactly, a  

fire causing death or serious injury may 

occur. 
Do not store a spare gas cylinder under or  

near this appliance. Never fill the cylinder  

beyond 80% full.
If you smell gas

1.  Shut off gas to the appliance at its source,  

if possible.

2.  Extinguish any open flame.
3.  Open hood.
4.  If odour continues, immediately call your  

gas supplier or fire department.

Do not connect your appliance to a gas  

cylinder exceeding 9kg capacity.
Never connect an unregulated gas cylinder to  

your appliance.
Read carefully before assembling and 

operating your appliance.

 

FOR YOUR SAFETY

• Do not store or use petrol or other  

flammable liquids in the vicinity of this or  

any other appliance.

• Keep the gas hose away from hot surfaces  

and protect from dripping grease. Avoid  

unnecessary twisting of hose. Visually  

inspect the hose prior to each use for  

cracks, excessive wear or other damage.  

Replace the hose if necessary.

• Never test for gas leaks with a lit match or  

open flame. Never light appliance with door 

closed or before checking to ensure the 

burner tubes are fully seated over gas valve 

orifices.

• Never alter or modify the regulator or gas  

supply assembly.

• Ensure the appliance is set up on a level  

and stable surface.

• Do not move the appliance while in use or  

when hot.

Summary of Contents for BQ2050W





















Reviews: