Gasmate BQ1094 Instruction Manual Download Page 9

9

8

Location of your Barbecue

DO NOT use your barbecue in garages, porches, sheds, 
breezeways, or other enclosed areas. Your barbecue is to 
be used OUTDOORS. The barbecue is not intended to be 
installed in or on recreational vehicles and/or boats and 
should not be placed under any surface that will burn. Do 
not obstruct the flow of combustion and ventilation air 
around the barbecue housing.

Protect Children

Keep children away from barbecue during use and until 
barbecue has cooled after you have finished. Do not 
allow children to operate barbecue.
Always ensure that no sporting or physical activities are 
carried out in close proximity to the barbecue during use 
and while still hot.

Tools You Will Need

Adjustable spanner, Phillips head screwdriver.

Check Barbecue for any Damage

Inspect barbecue parts as you proceed.  Contact your 
supplier for assistance regarding replacement of any 
damaged or missing parts. Do not assemble or operate a 
barbecue that appears damaged. Barbecues for use with 
gas cylinders are labelled ‘Propane Gas’ or ‘Universal 
L.P.G’. Check labelling at the gas connection on your 
barbecue.

CARE & MAINTENANCE

As with all appliances, proper care and maintenance 
will keep them in top operating condition and prolong 
their life. Your new gas barbecue is no exception. By 
following these cleaning procedures on a timely basis, 
your barbecue will be kept clean and working properly 
with minimum effort.

Flash-Back 

Spiders and small insects occasionally spin webs or 
make nests in the burner tubes during warehousing and 
transit. These webs can lead to a gas flow obstruction 
which could result in a fire in and around the burner 
tubes.  Cleaning with a soft brush before use and at 
least every six months is recommended.
This type of fire is known as ‘FLASH-BACK’ and can 
cause serious damage to your barbecue and create an 
unsafe operating condition for the user. Although an 
obstructed burner tube is not the only cause of ‘FLASH-
BACK’ it is the most common cause and frequent 
inspection and cleaning of the burner tubes is necessary.
If fire occurs in and around the burner, immediately turn 
off gas at its source and turn the burner control to ‘OFF’, 
wait until the barbecue has cooled, then clean the burner 
tubes and burner ports.

Cleaning the Cooking Surface

After cooking, turn burner control to ‘OFF’ and let 
barbecue cool before attempting to clean the cooking 
surface. Before first use and periodically, it is suggested 
that you wash the cooking surface in a mild soap and 
warm water solution.

Care of Cooking Surface

Use and care of the cooking surface is important. Do not 
use pans on the cooking surface. Do not overheat the 
cooking surface with the hood down or no food on the 
cooking surface.

Cleaning the Drip Tray

To avoid fat or grease dripping from the barbecue 
remove and empty the drip tray after each use. Wait 
until the drip tray is cool to touch before disposing of 
contents.
The drip tray should be washed periodically in a mild 
detergent and warm water solution.   

  

IMPORTANT

•  Beware of spiders and wasps.  Burner tube  
  should be inspected and cleaned periodically.
•  This appliance must only be serviced by an 

authorised person. 

•  To avoid any flare-ups, it is recommended that 

the drip tray be checked and emptied regularly. 
Contents of the drip tray may be very hot during 
cooking. If emptied during extended cooking 
extreme caution should be taken and direct 
contact by hand should be avoided at all times. 
Allow to cool completely before disposing of the  
contents.

Summary of Contents for BQ1094

























Reviews: