background image

5

4

GENERAL ASSEMBLY

Connecting & Disconnecting to  

the gas source 

Familiarise yourself with the general information and 
safety guidelines located at the front of this manual.

Check:

1. The cylinder is filled. A sloshing sound will be  
  heard when shaken.
2. The burner controls are in the ‘OFF’ position

Connecting:

1. Ensure cylinder valve is in its full off position.
2. Check for any damage to either the cylinder  
  connection or the hose. NEVER attempt to use  
  damaged equipment.
3. When connecting the hose to the cylinder  
  tighten the nut to a positive stop by hand  
  or spanner.
4. Open cylinder valve fully. If a leak can be heard  
  at either end of the hose turn cylinder off and  
  tighten joint. Wait 5 minutes before re-testing  
  and use a soapy water solution to check the  
  joint. If bubbles appear, the connection will  
  need to be re-tightened.

Disconnecting:

1. Ensure the burner control is in the  
  ‘OFF’ position.
2. Ensure cylinder valve is in the full off position.
For storage and cylinder exchange, disconnect hose 
at the cylinder only, DO NOT disconnect hose from 
appliance.

LIGHTING PROCEDURE

Burner Operation &  

Ignition System Check

1. Turn the control knobs clockwise to “OFF”   
position. 
2. Connect the regulator to the gas bottle.  Turn  
  the gas supply “ON” at the cylinder. Check  
  with the  use of soapy water for any gas    
leakage between the bottle and the regulator 
3. Push down a control knob and keep  

 

  pressing whilst turning anti-clockwise  

 

  to the “HIGH” position whilst also pressing the  
  ignition button (a clicking sound is heard), this  
  will light the burner. If the burner does not light,  
  repeat this process.  
4. If the burner still does not light, turn the control  
  knob to ‘OFF’ wait 5 minutes and repeat step 3.  

Nominal Hourly Gas Consumption

BBQ

Model

Number

Gas 

Type

Number

of BBQ

Burners

Injector

Size Main

Burners

Injector

Size Side 

Burner

Injector

Size Rear 

Burner

Total Gas  

Consumption

MJ/h

Gas

Pressure

kPa

BQ1011P

Propane

6

0.98mm

1.13mm

1.00mm

96 MJ/h

2.75 kPa

MJ/h each

11.6 MJ/h

15 MJ/h

11.5 MJ/h

Natural 

Gas

6

1.6mm

1.70mm

1.75mm

99 MJ/h

1.0 kPa

MJ/h each

12 MJ/h

14 MJ/h

13 MJ/h

BQ1010P

Propane

4

0.98mm

1.13mm

1.00mm

73 MJ/h

2.75 kPa

MJ/h each

11.6 MJ/h

15 MJ/h

11.5 MJ/h

Natural 

Gas

4

1.6mm

1.70mm

1.75mm

75 MJ/h

1.0 kPa

MJ/h each

12 MJ/h

14 MJ/h

13 MJ/h

Summary of Contents for BQ1010P













Reviews: