Using Your Ceramic Cooktop
To start cooking
• After power on, the buzzer beeps once, all the indicators light up
for 1 second then go out, indicating that the ceramic cooktop has
entered the state of standby mode.
1. Touch the ON/OFF control
，
all the indicators show “-”.
2. Place a suitable pan on the cooking zone that you hope to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3. For model CH30BF, CH60BF, CH603BF, CH604BF, CH77BF, touch heating
zone selection controls first, and select a heat setting by touching the “-” or “+”
control. Then touch “-” or “+” to adjust the heating stage.
4. For model CH604BF, CH77BF, CH90BF, that have dual zone or
oval zone, activate the double zone by pressing , when double
zone is working, turning double zone off by pressing .
5. For model CH603BF, CH90BF, select a heat setting by touching the
“-” or “+” control. Then touch “-” or “+” to adjust the heating stage.
• If you don’t choose a heat setting within 1 minute, the ceramic
cooktop will automatically switch off. You will need to start
again at step 1.
• You can modify the heat setting at any time during cooking.
6. For model CH603BF, CH604BF that have triple zone, activating or deactivating
dual zone by pressing .
For model CH90BF, that have triple zone, activating or deactivating triple zone
by pressing .
09
Australia:
[email protected]
www.gaslandchef.com
[email protected]
www.gaslandchef.com.au
United States:
