EN - Page 3
Safety instructions
The electrode is only intended for the above-mentioned purpose.
The manufacturer is not liable for damage resulting from improper
use.
Respect the following instructions, otherwise the electrode may be
damaged or the measurement results may be falsified.
When working with chemicals, all relevant safety regulations of the
manufacturer and the laboratory must be respected.
Use
Device overview
Construction and dimensions
Screw cap, L = 6,2 mm
Electrode head PTFE,
ø
20 mm
Thread G 1/8
L = 8 mm
Electrode shaft PEEK
Ø = 1,6 mm
L = 53,5 ± 0,5 mm
Socket for 2 mm banana plug
Hydrogen electrode
87 ± 5 mm
30 mm
Contact wire
