-9-
6. RECEIPT AND START-UP
6.1 Receipt
When you receive the machine, you must first check that it is in perfect conditions, without any
damage, dents or knocks.
If there is any problem, we advise you notify the distributor or INDUSTRIAS GASER S.L. directly.
6.2 Assembly
The MINI model batter-breading machines are supplied disassembled. These machines basically
comprise the following parts
Image 1. Initial assembly 1
The process for assembling the machine is described below.
1. Fit each of the legs (Pos. 1, image 1) using the 3 screws and the 3 M10 cap nuts. The legs include
the guides for the tray supports.
2. Once the legs have been attached, attach the two crossbars (Pos. 2, image 1) using the screws
and M8 nuts.
3. Next attach the breader (Pos. 3, Image 1). Fit the slots into the curved part of the breader tank
then lower it so that the pivots go into the corresponding holes.
Summary of Contents for PRACTIC 350
