Installing OrPT Barcode Kit and Cover
Page 6
MDE-5262A Barcode Reader Installation and Setup Instructions · May 2016
7
Peel off the label that covers the barcode reader pane on the rear side of the OrPT front panel,
by carefully inserting a screwdriver between the label and the OrPT frame in order to lift the
label, and then peel it off with your hand, as shown in
Use the screwdriver to carefully lift the label to avoid scratching the plastic cover.
CAUTION
Figure 3: Removing Black Label
(i)
(iv)
(ii)
(iii)
8
Place the barcode on the bracket and secure it by using two M3 screws and nuts provided in
the kit.
