Preliminary Guidelines
4.3 Station Survey
Page 24
MDE-5411A ForeHB Islander Prime Installation Manual · October 2018
4.3.1.2 Homebase Forecourt
The Homebase Forecourt includes the following components:
• Islander Prime
• Electronic or mechanical dispensers. This product has only been evaluated for use with
UL Listed Dispensers.
• One or more fuel tanks
• TLG probe for each fuel tank. This product has only been evaluated for use with UL
Listed TLGs.
4.3.1.3 Head Office System (Optional)
The Head Office system consists of a fully integrated management hardware and software tool
that supports homebase stations and small fuel stations with their sale management of products
including inventory management and reporting.
The Head Office system is a remote control center that stores, processes, and analyzes all the
transactions at the homebase station. The Head Office Station provides an integrated retail
solution.
4.3.2 Locating All Objects
• Locate the roads around the site
• Locate the islands and their dispensers
• Locate the fuel tanks
• Locate the intended position of the Islander Prime pedestal
• Draw a basic map of the site with all the objects
4.3.3 Assigning Logical IDs
When performing a station survey, assign Logical IDs as described below
4.3.3.1 Fuel Tanks
• Assign the tank sequential number (coordinated with the station manager)
• Assign its fuel code and name
• Assign its TLG Probe (AP) ID
4.3.3.2 Dispenser Units
• Assign an ID to every dispenser name and pump server
• Assign an ID to every dispenser pump (P)
• Assign an ID to every pump CPU addresses if any
• Assign an ID to its nozzles (N)
• Assign to each nozzle the tank (T) ID to which it is linked
4.3.3.3 Islander Prime Pedestal
• Assign the Islander Prime its ID
• Assign the panel printer (PP) its ID
• Assign their IDs in an ascending order with the dispenser unit IDs