SF
6
-Aciditor
9
4 Security
This section gives an overview of all important safety aspects for an optimal protection of the
personnel as well as for the safe and trouble free use of the device. Additionally, the
individual chapters contain concrete safety references with respect to the prevention of direct
dangers which are indicated by symbols.
4.1 Intended Use
The device may
not
be operated by introducing highly aggressive gases or liquids! The
working reliability is only ensured when the equipment is applied for its purpose:
To measure SO
2
up to 100 ppm
v
(standard) in SF
6
or in other non aggressive gases !
NOTE! Danger for real values!
Each use of the device, that differs from the intended use is forbidden and will
be regarded as “out of purpose”.
All claims or requirements of any kind against the manufacturer and/or its authorized persons
that arise due to damages from a not intended use of the device will be rejected. All
damages that arise from a not intended use are of the operator’s responsibility.
The intended use of the equipment and its correct handling according are described in the
operating instructions of this manual. Other parts than the parts belonging to the scope of
supply, may only be used after G.A.S.’ approval.
4.2 Responsibility of the Operator
This manual must be kept in direct access and together with the device and accessible to the
operating staff at any time. The hints, information and instructions are to be followed without
any restrictions or reservation!
Besides the indicated safety references and instructions in this manual, the local rules for the
prevention of accidents and the general safety regulations - valid for the area of application
of the device - as well as the valid environmental-protection regulations are to be considered
and respected.
The technical responsible as well as the operator should take care of a trouble free use of
the device as well as of clear definitions of the competences during operation, maintenance
and cleaning.
