GAS GCD200, Manual

Page: 16 / 22

16
2ZQHU¶0DQXDO
1. Insert / Eject CD
Insert a disc into CD slot with label
side up. The disc will be automatically
loaded into the unit, even when it is off
or at radio mode. The word “LOAD”
will blink on the display and the CD
will play automatically. Press the
EJECT Button to eject the disc from
the slot. If the disc is not removed
from the slot within 5 seconds, it will
automatically be loaded into the slot
again. When the disc is ejected and
removed, the unit will automatically
switch to radio mode.
While you are playing a disc with MP3
or WMA, The first file in the root fold-
er will be played. if there is any ID3
information that will be displayed as
the file is playing.
To play MP3/WMA files from a USB
flash memory or SD card, insert a
USB flash memory or SD card into the
USB port or SD port of the unit. The
unit will start playing MP3/WMA files
on the USB flash memory automati-
cally.
If the MP3/WMA files are stored in
folders on the USB drive, the unit will
start by playing the first song in the
first folder. After playing all the files
sequentially in the first folder, the unit
will play sequentially all of the files in
the next folder. The unit will continue
playing through all of the folders on
the USB drive in this manner.
If the USB drive has loose files and
folders containing files, it will play the
loose files sequentially, then it will play
the files in the folders sequentially.
2. Multi-Session CD Reading
This unit can read multi-session CDs.
The multi-session reading will be
activated automatically if the play-
er detects a file that is written in
multi-session format.
3. Selecting Tracks
Press the SEEK >>| Button to
advance CD to the next track. Track
numbers
will be shown on the display. Press
and hold SEEK >>| to fast forward.
Press the SEEK |<< Button to go to a
previous track. Track numbers will be
shown on the display. Press and hold
the SEEK |<< Button to fast reverse.
Disc will play normally when the No.
1(play/pause) Button is pressed.
4. Play / Pause CD
Press the No.1/PAU Button to pause
the CD. Press this button again to
resume playback.
5. Scanning Tracks
Press the No.2/INT Button to play the
first 10 seconds of each track, “INT”
will be displayed on the display. Press
this button again to resume playback.
6. Repeat
Press the No.3/RPT Button to repeat
the current track. Press it again to
cancel.
7. Random
Press the No.4/RDM Button to play
all the tracks in random order. “RDM”
will appear on the display. Press this
button again to stop random play.
8. Folder Down
Press the “ 5 ” button once to go
back one folder.
9. Folder UP
Press the “6 ” button once to ad-
vance one folder.
10. Search Modes
There are 3 search modes to help find
your favorite MP3 & WMA tracks. The
search modes only works with MP3/
WMA CDs, and USB flash memory
with MP3/WMA files.
A. Simple Track Search
Press the SEEK |<< or >>| Button to
go to the next track or previous track.
B. Track Search
Press the F/PS Button, TRK-SCH will
appear on the display. Use the VOL
+/- Button to select the track number.
press the SEL button so that the cho
CD/MP3/WMA/USB/SD Operation
+
-