www.gassense.eu
G
as Sensor
GS-220.P
CHAPTER
1
INTRODUCTION
1.1. Safety instructions
Before using the unit read carefully the manual. It consists important information,
regarding user safety and correct system exploitation.
Gas sensor must be mounted only by licensed personnel !
Electrical installation:
✔
Electrical connections must be done only by licensed electrical installer.
✔
Make sure that prior to connection, all electrical pins ARE NOT energized
✔
All electrical connections must be done according to unit's normative
requirements
✔
Prior to switching on the unit make sure that the voltage of the power supply
corresponds to manufacturer requirements.
Exploitation in potentially combustible environments:
✔
The gas sensor is to be used only in working environments for which it has
certification.
✔
In case of mechanical damages of the gas sensor's corpus, the unit becomes
non-effective for exploitation in potentially combustible environments.
✔
For dismounting first switch off the power supply and after no less than 10
minutes start dismounting.
Warning: the gas sensor is designed for exploitation in potentially combustible
or toxic environment. The long lasting exposure to high concentrations may
lead to death.
ver.1.0
page 4 / 23