www.gassense.eu
G
as Sensor
GS-220.P
Figure 3.2 – Dimensions. Side view
3.5. Mechanical installation
Gas sensor GS-220 is attached via 2 bolts
φ
3,8 х 35.
When attaching to wall keep the following steps for gas sensor attachment :
1. Drill openings into the wall according to fig. 3.1.
2. Place
φ
6 mm dubels into the openings
3. Unpack the sensor
4. Take off sensor’s lid by removing four bolts (fig. 3.3.)
ver.1.0
page 10 / 23
58