-
49
-
Special care according to track conditions
1. In dry, dusty conditions (such as volcanic ash or fine powdery
dust) special care must be given to keep the air cleaner element
clean.
2. Wet heavy clay or mud sticking to the tyres and other parts of the
vehicle. The mud can add significantly to the weight if the vehicle
obstructing the radiator and therefore reduce performance. Take
care not to overheat the engine. The same applies to deep sand.
3. In muddy or sandy conditions adjust the chain looser than in other
conditions as the chain and sprockets will pack with mud/sand and
reduce chain slack.
4. Check chain and pinion/sprocket wear frequently when riding in
mud or sand since wear is increased in these conditions
5. In dusty conditions as the air cleaner collects dust, the engine
runs richer.
AVAILABILITY OF SPARE PARTS
Your Gas Gas dealer will provide any information you may require
about spare parts.
PER MONTH OF USE
(1). Check
1. Tighten the front axle and disks
2. Tighten the front forks flange bolts
3. Tighten the handlebar clamp bolts
4. Tighten the throttle control bolts
5. Verify, grease the throttle control
6. Verify the front and rear brake lines
7. Front and rear brake fluid level
8. Front and rear brake disc and calliper installation
9. Front and rear brake operation
10. Fuel tank installation
11. Check cables
12. Engine mounting bolts
13. Engine pinion
14. Shift pedal bolt
15. Level of motor oil
16. Battery charge
17. Rod mounting bolts
18. Rod bolts
19. Rear shock bolts
20. Tighten the swinging arm pivot nut
21. Tighten the rear axle nut
22. Tighten nut and bolt of rear sprocket
23. Check seat
24. Tighten the spokes
25. Tyre air pressure
26. Tighten chain
27. Coolant Level
