GAS GAS MC50 2021, Owner'S Manual

Page: 55 / 119

SERVICE WORK ON THE CHASSIS 11
53
F02992-10
Main work
–
Remove screws with toothed washers
1
from the silencer cap
2
.
–
Remove end cap and outer tube
3
.
–
Remove glass fiber yarn filling
4
from the inner tube.
–
Clean the parts that need to be reinstalled and check for damage.
–
Mount the new glass fiber yarn filling on the inner tube.
–
Slide the outer tube over the glass fiber yarn filling.
–
Insert the end cap into the outer tube.
–
Mount and tighten the screws with the toothed washers.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the main silencer. ( p. 52)
11.30 Removing the engine sprocket cover
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 37)
F02993-10
Main work
–
Remove screws
1
.
–
Remove screw
2
.
–
Take off the engine sprocket cover.
11.31 Installing the engine sprocket cover
F02993-10
Main work
–
Position the engine sprocket cover. Mount screws
1
, but do not
tighten yet.
–
Mount and tighten screw
2
.
Guideline
Screw, engine sprocket
cover M8 15 Nm (11.1 lbf ft)
–
Tighten screws
1
.
Guideline
Screw, engine sprocket
cover M6 10 Nm (7.4 lbf ft)
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 37)