GAS GAS MC 350F 2023, Owner'S Manual

Page: 54 / 143

11 SERVICE WORK ON THE CHASSIS
52
11.13 Lubricating the steering head bearing
H02387-01
–
Remove the lower triple clamp. ( p. 48)
–
Install the lower triple clamp. ( p. 48)
Info
The steering head bearing is cleaned and lubricated in the
course of removal and installation of the lower triple clamp.
11.14 Removing the start number plate
A00778-10
–
Remove screw
1
.
–
Unhook the start number plate from the brake line and remove it.
11.15 Installing the start number plate
A00779-10
–
Position the brake line in holders
A
on the start number plate.
–
Position the start number plate. Mount and tighten screw
1
.
The holding lugs engage in the fender.
11.16 Removing front fender
Preparatory work
–
Remove the start number plate. ( p. 52)