GAS GAS MC 350F 2023, Owner'S Manual

Page: 50 / 143

11 SERVICE WORK ON THE CHASSIS
48
11.9 Removing the lower triple clamp
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 44)
–
Remove the front wheel. ( p. 89)
–
Remove the fork legs. ( p. 46)
–
Remove the start number plate. ( p. 52)
–
Remove front fender. ( p. 52)
–
Remove the handlebar cushion.
A00801-10
Main work
–
Open cable holder
1
on the left and detach the wiring harness.
–
Remove screw
2
.
–
Remove screw
3
.
–
Take off the upper triple clamp with the handlebar and set aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
A00800-10
–
Remove O-ring
4
.
–
Remove protective ring
5
.
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
11.10 Installing the lower triple clamp
B01605-10
Main work
–
Clean the bearing and sealing elements, check for damage, and
grease.
High viscosity grease ( p. 132)
–
Insert the lower triple clamp with the steering stem. Mount upper
steering head bearing.
–
Check that the O-ring at the top
1
is correctly positioned.
–
Slide on protective ring
2
and O-ring
3
.