-
39
-
2. Engine oil replacement and oil fitter element cleaning
a. Place the machine in a flat suface. Warm up the
engine for several minutes and turn off place a container
under the engine. Remove the dipstick and open the
drain plug to drain the oil.
b. Remove the oil fiter cover and oil filter clean the oil
strainer and oil filter with solvent.
c. Inspect the O-ring and replace if damaged.
d. Reinstall the oil filter, O-ring and oil filter cover.
Replace the oil strainer compression spring, O-ring
and drain pulg. Then tighten the drain plug and filter
cover bolts to the specified torque.
Tightening torque:
Drain pulg (engine): 43Nm(4.3m.kg)
Filer cover bolt:10Nm(1.0m.kg)
e. Add oil to the engine with oil and install the dipstick.
CAUTION
Be sure no foreign material enters the crankcase.
f. Warm up the engine for several minutes at
idle speed. Check for oil leakage when warming up.
CAUTION
If oil leakage is found, turn off the engine promptly and
check for the cause.
Recommended oil: see page 11
Oil quantity:
Periodic oil change:
1.5L(1.3mpqt)
With oil filter replacement:
1.6L(1.4mpqt)
Total amout:
1.8L(1.6mpqt)
3.0il pressure inspection
a. Wrap the cylinder with a cloth.
1 .oil gallery bolt
Summary of Contents for K2 QUAD 250 - SERVICE
