SERVICE WORK ON THE CHASSIS 13
57
13.27
Adjusting the chain guide
Info
The size of the chain wheel varies with the number of teeth. The chain guide can be adjusted on small sprockets.
M01693-10
–
Remove screw
1
.
–
Position the chain guide.
–
Mount and tighten the screw.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
13.28
Checking the frame
M01652-01
–
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a mechanical
impact:
–
Change the frame.
Info
Always replace a frame that has been damaged due
to a mechanical impact. Repair of the frame is not
authorized by GASGAS Motorcycles.
13.29
Checking the link fork
F02202-01
–
Check the link fork for damage, cracking, and deformation.
» If the link fork shows signs of damage, cracking, or deformation:
–
Change the link fork.
Info
Always replace a damaged link fork. GASGAS Motor-
cycles does not permit repairing link forks.
13.30
Checking the rubber grip
401197-01
–
Check the rubber grips on the handlebar for damage, wear, and
looseness.
Info
The rubber grips are vulcanized onto a sleeve on the left and
onto the handle tube of the throttle grip on the right. The
left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve or the
throttle tube.
» If a rubber grip is damaged, worn, or loose:
–
Change the rubber grip.
