GAS GAS ES 700 2023, Owner'S Manual

Page: 65 / 139

SERVICE WORK ON THE CHASSIS 11
63
11.24 Adjusting chain guide
S02196-10
–
Remove screws
1
and
2
. Take off the chain guide.
Condition
Number of teeth:
≤
44 teeth
–
Insert nut
3
in hole
A
. Position the chain guide.
–
Mount and tighten screws
1
and
2
.
Guideline
Screw, chain guide M6 10 Nm (7.4 lbf ft)
Condition
Number of teeth:
≥
45 teeth
–
Insert nut
3
in hole
B
. Position the chain guide.
–
Mount and tighten screws
1
and
2
.
Guideline
Screw, chain guide M6 10 Nm (7.4 lbf ft)
11.25 Checking the rubber grip
401197-01
–
Check the rubber grips on the handlebar for damage, wear, and
looseness.
Info
The rubber grips are vulcanized onto a sleeve on the left and
onto the handle tube of the throttle grip on the right. The
left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve or the
throttle tube.
» If a rubber grip is damaged or worn:
–
Change the rubber grip.
W00116-10
–
Check that screw
1
is firmly seated.
Guideline
Screw, fixed grip M4 5 Nm (3.7 lbf ft)
Loctite ® 243™
Diamond
A
must be located at the top.