GAS GAS EC250E 2012, Owner'S Manual

Page: 25 / 81

Owner’s manual
-25-
Confi guration
SET HIGH TEMPERATURE WARNING
When programmed engine temperature is reached, the amber warning led will
turn on. The warning will be disabled if the value is 0.
Change the blinking digit with the le ft bu tt on.
Change to next digit using the bu tt on
To con fi rm press the bu tt on
NOTE: engine temperature sensor is op ti onal and is not available in GAS GAS .
SET DANGER TEMPERATURE WARNING
When programmed engine temperature is reached, the red warning led will turn
on. The warning will be disabled if the value is 0.
Change the blinking digit with the le ft bu tt on.
Change to next digit using the bu tt on
To con fi rm press the bu tt on
SET OIL REMINDER
When programmed kilometers or miles are reacher, the oil change reminder
icon will turn on.
Change the blinking digit with the le ft bu tt on.
Change to next digit using the bu tt on
To con fi rm press the bu tt on
SET MAINTENANCE REMINDER
When programmed kilometers or miles are reacher, the maintenance reminder
icon will turn on.
Change the blinking digit with the le ft bu tt on.
Change to next digit using the bu tt on
To con fi rm and go back to normal mode, press the bu tt on
NOTE: the oil and maintenance reminders must be manually reset by entering
them again in the con fi gura ti on mode.
Measure of the wheel circumference
METHOD 1
Diameter (mm)
Measure the diameter of the front wheel in millimeters. Mul ti ply the diameter
by 3.14 and you will get the measure of the wheel circumference.
NOTE: engine temperature sensor is op ti onal and is not available in GAS GAS .