-
13
-
(B)
SHIFTING GEARS
The transmission is with 5 speeds, return shift type meaning that to
go back to first gear from a higher gear, you must shift back through
the gears one by one.
To engage first gear from neutral, pull in the clutch lever and push
down on the shift pedal then release the pressure on the shift pedal
and gently release the clutch lever.
CAUTION
When changing gears, press firmly on the shift pedal to ensure
complete, positive shifting. Careless, incomplete shifts can cause
the transmission to jump out of gear and lead to engine damage.
(B). Shift pedal.
COLD STARTING
To do the cold start, pull the starter.
- There is no need to use the throttle, simply start the engine. Note
that the engine will start after a certain number of revolutions.
After the warming time, you can pull out the cold starter. With the
cold start, the bike warm slowly without damages.
NOTE
- If the engine is drowned, you can pres the hot starter and on
the same time, press the kick pedal 10 at 20 times. When the
engine is dry, you can start normally.
HOT START
Don’t use the cold start and don’t touch the trotle. Press the hot
starter and start the engine with the kick or the electric starter. When
the engine is running, pull out the hot start.
