WILD HP -
111
-
Rear lights
WARNING
The bulb is hot when lit or immediately after turning it off. Wait for
it to cool down before touching or removing it. You may get burnt,
or fire may catch if the hot bulb touched something.
- With a cross-tip screwdriver unscrew the two screws (G) and
remove the lens.
- To remove the bulb, press it against the spring, turn it ¼ anti-
clockwise and replace it with a new one.
- Put the lens back in place.
NOTE
Make sure the lens is well tightened.
(F)
(E)
6.- After freeing the bulb (E) from the wire part we can remove it
from the rear.
7.- Replace the bulb by a new one. To put it in place we will follow
the inverse process.
3.- Unscrew the 3 screws that hold the light from below.
4.- Unplug the bulb cable and remove the cover over the rear part
of the light.
5.- A piece of wire spring holds the bulb in place (E).
(G)
(E)
(D)
(D). Cover.
(E). Bulb.
(F). Wire spring
holds.
Summary of Contents for 2005 WILD HP 450
Page 1: ...TENZIONE TENZIONE...
Page 2: ......
