background image

The cable is elastic, and the two ends are joined to the rider and the
vehicle, with the part joined to the vehicle sensitive to sudden
movements and easily released in such cases. When released, it
automatically stops the engine.

NOTE

Make sure you release the parking brake before operating the
throttle.

You are recommended to attach the cable to a strong point, as it is
important that the cable is not accidentally released in any case.
(For example, the cable may be attached to your trousers, jacket,
to your wrist... but always to a part where it will not come off easily).

WARNING

The vehicle must not be used without attaching the emergency stop
system. Ignoring this order may cause serious consequences.

WILD HP -

81

-

REAR BRAKE PEDAL

The rear brake pedal 

(B) 

is located on the right side of the lower

chassis. Activate it to apply the brake to the rear wheels.

EMERGENCY STOP

The vehicle features an emergency stop system. This mechanism
prevents the vehicle from running on in case the rider should fall.

One end (C) is attached to the vehicle and the other end (D) is
attached to the rider.

FRONT BRAKE LEVER

The front brake lever 

(A)

 is located on the right side of the handlebars.

Activate it to apply the front-wheel brakes.

(C)

(D)

(A)

(B)

Summary of Contents for 2005 WILD HP 450
































































Reviews: