8
9
OPERATING THE WORKOUT WINDOW
The Cyber is equipped with Fisher’s patented
computer within a computer, the Workout
Window. The Workout Window allows you to
track the intensity portions of your ride
separately from the information for the
whole ride.
The revolutionary Workout Window feature
was developed to make your riding
experience—
SAFER
No need to compromise traffic laws to
enhance your average speed. Ride safely
through traffic knowing that you can start the
Workout Window when you reach the
open road.
HEALTHIER
No need to skip a proper warm up and cool
down to enhance your average speed. Start
your Workout Window after your warm up
and stop it before your cool down.
MORE ENJOYABLE
No need to accept a compromised average
speed. The Workout Window can be a real
motivator by showing you your true average
speed when you have the “Hammer Down”.
MORE PRODUCTIVE
Use the Workout window to track your per-
formance while ridding your favorite course,
during intervals, time trials, or even sprints.
Get the feedback you need without losing
your cumulative riding data.
Entering the Workout Window
Press the WORKOUT WINDOW key from any
main screen to enter the Workout Window.
The Workout Window Icon ( ) will appear
on the right hand side of the screen.
Activating the Workout Window
To activate the
Workout Window
you must press the
START/STOP key in
the Workout
Window SPD/STP
screen to start the
Stopwatch. Once
the START/STOP key is pressed the action of
the Stopwatch is automatic, starting and stop-
ping when the wheel of the bike is turning. To
stop the Workout Window you must press the
START/STOP key again. The Workout Window
icon will flash to indicate that the Workout
Window is operating.
Clearing the Workout Window
1.
Pressing the START/STOP key for 2 sec-
onds in the main SPD/STP screen will reset all
functions, both main and Workout Window
2.
Pressing the START/STOP key for 2 sec-
onds in the WORKOUT WINDOW SPD/STP
screen will reset only the WORKOUT WINDOW
functions and will not affect the Normal
Operating functions.
3. Resetting Maximum Speed –
Just as
in the Normal operating mode. If you are
doing sprint workouts, the Workout Window
maximum speed of the Cyber can be reset
independent of the other WORKOUT WINDOW
functions by pressing and holding the MODE
key for two seconds while in the SPD/MAX screen.
Setting Wheel Size
1.
With the Cyber in the SPD/ODO screen,
press and hold the MODE key for 2 seconds.
The screen will clear and the default wheel
size (2124 700 x 25c) will appear with the
first digit flashing.
2.
Use the
START/STOP key to
advance to the
correct number for
your wheel size.
3.
Press the MODE
key to set and
advance to the next digit.
4.
Repeat until all digits are programmed.
5.
Pressing the MODE key the last time will
advance the unit to programming the Odometer.
Setting the Programmable Odometer
The Cyber is equipped with separate
Programmable Odometers for both the main
functions and the Workout Window. The
Programmable Odometer allows you to
re-enter your computers last mileage back
into memory after a battery change.
NOTE: Remember to write down the mileage
of both the Main Odometer and Workout
Window Odometer before you change the bat-
tery in the unit.
1.
Entering the main Programmable
Odometer happens automatically after you
have finished
setting the wheel
size. The screen
will clear and 5
zeros will appear
with the first digit
flashing.
2.
Use the START/STOP and MODE keys to
advance and set the digits in the same manner as
you did with the clock and wheel size.
3.
When you press the MODE key for the last time
the unit will return to the main SPD/ODO window.
4.
To skip the procedure for setting the pro-
grammable odometer press and hold the MODE
key for one second.
TO SET THE PROGRAMMABLE ODOMETER
IN THE WORKOUT WINDOW
1.
Press and Hold the MODE key for 2 seconds
while in the Workout Window SPD/ODO screen.
2.
The screen will clear and 5 zeros will appear
with the first digit flashing. Use the START/STOP
and MODE keys to advance and set the digits in
the same manner as you did with the clock and
wheel size.
3.
When you press the MODE key for the last
time the unit will return to the Workout Window
SPD/ODO Screen.
OPERATION OF THE MAIN CYBER FUNCTIONS
The operation of the main functions of the Fisher
Cyber cycle computer is mostly automatic. The stop-
watch turns on and off automatically when the wheel
turns. Average and Maximum speeds are automati-
cally calculated using the ride time stopwatch.
Resetting the Main Functions
Reset the stopwatch by pressing and holding the
START/STOP for 2 seconds while in the SPD/STP
screen. This action also clears Average Speed,
Maximum Speed and Trip Distance, as well as
all of the Workout Window functions to zero.
Resetting Maximum Speed
If you are doing sprint workouts, the Maximum
Speed of the Cyber can be reset independent of
the other functions by pressing and holding the
MODE key for two seconds while in the Maximum
Speed screen.
