Garwoods EC-2368IC, Installation & Operating Instructions Manual

Page: 13 / 26

13
8
、
Trouble-shooting Guideline
8.1
、
Code Of Breakdown
：
In case of improper installation or use, abnormal power supply or breakdown of the
induction cooker, the LED digit on front panel will display code of breakdown.
Code of breakdown Root cause of breakdown
E0 Failure of Circuit
E1 Cookware not be sensed on the cooking zone
E2 High temperature inside induction heater
E3 Failure of heater temperature sensor
E4
Failure of IGBT temperature sensor
E5 High power voltage
E6 Low Power voltage
8.2
、
Trouble Shooting
：
Garwoods’s induction cooker has adopted the most advanced micro-computer inspection
and control technology. Some phenomena appeared in the course of working may not
indicate problems to occur.
Please check the induction cooker according to the follow specifications
Situation Reason Solution
The heater works for a while
and stops, indicating
.
E2
/
.
1. The inlet of fan is off.
2. The fan stops working.
3. The surrounding
temperature is too high.
Pls. check if there is some
heating device nearby.
4. The temperature of the
stuff being heated rises
too high.
1. Clean and remove the stuff
in the inlet.
2. Ask help from a
professional service
technician.
3. Improve the ventilation.
4. Remove the cause for fry
heating and continue to
use the cooker after the
calefaction area is cooling
down.
The heater works for a while
and stop, indicating
.
E3
/
or
.
E4
/
.
The temperature sensor
breakdown. Ask help from a professional
service technician.