Garwoods EC-2220, Installation & Operating Instructions Manual

Page: 9 / 26

8
4
、
Operation Method
4.1
、
Operation Instructions
：
Power Connection
After power connection, buzzer will make a short sound. LED Digital
Indicator will show
%
----
&
and the induction cooker keeps at the stand-by mode.
On switching Place cookware on heating zone (Pls. refer to
Usable and Non-usable
Cookware
), by pressing the “ON/OFF” key, LED will show the pre-set power 1400W.
Power Level Alteration
At the power function, by pressing “
'
” Or “
(
” key to increase
or decrease power level. LED digit shows set power level.
(Note : This infrared cooker adopts intellectual power distribution technology. When the
power level of a cooker zone is increased and total power level exceeds specified value, the
micro-computer system will automatically decrease power level of another cooker zone so
as to assure total power is under specified value.)
Selecting Timer By pressing
)
Timer
*
key, the time indicator will be on. At the time, by
pressing
)'*
Or
)(*
key to set the required time. The operational setting range is
between 1 min. and 3 hrs 59 min. (Display form in
+
hrs : mins
,
). After setting, the LED
will change to power level. When set time is reached, buzzer will make a long sound and
the induction cooker stops heating, the time indicator will be off and LED shows “END”.
During time setting, by pressing
)
Timer
*
key again to check the residual time. To cancel
time setting, set the timing to “ZERO”.
Lock Function By pressing the
)
Lock
*
key, buzzer will make a short sound and a red dot
will be on. At this time, all keys will be locked in order to avoid mis-operation. By
pressing
)
Lock
*
key again, buzzer will make a short sound and a red dot will be off.
The infrared cooker will be locked automatically after 15 seconds when switching off.
For restarting the infrared cooker, by pressing the
)
Lock
*
key again, buzzer will make
a short sound and the red dot will be off, then by pressing the
)
ON/OFF
*
key to enter
the normal cooking mode by other function keys.
High Temperature Indicator After cooking, the
)
High temperature indicator
*
will be
on, that means the temperature on the heating zone is over 60 c. At this time, the
heating zone is under a very high temperature condition, please do not attempt to
place any combustible materials on the heating zone and touch the heating zone to
avoid any risk of fire and getting burnt.
-
Off Switching During heating, by pressing
)
ON/OFF
*
key to switch off.