Garudan GOV-1004-24, User Manual

Page: 19 / 79

© ANITA
MP04000EN_190301
7. Changing loopers
8. Changing needle guard
Please take off rear needle guard (2) by loosen
set screw (1). Loosen set screw (3) can take off
front needle guard (4).
Changing lower looper
Changing lower looper by take-
off screw (1). When installing,
please make sure the crank of
lower looper must attach to the
bottom of grove of lower
looper arm closely.
Can take off rear needle guard (2) by loosen screw (1).
Loosen screw (3) can take off front needle guard (4).
rear needle guard (2) by loosen
set screw (1). Loosen set screw (3) can take off
Loosen set screw (1) can take off rear chain
stitch needle guard (2). Loosen set screw (3) can
take off front chain stitch needle guard (4).
Changing upper looper Changing chain stitch looper
lower looper must attach to the
Changing upper looper by take-
off screw (1).
Changing the chain looper by
loosen screw (1). When
installing, please make sure the
crank of chain looper must
attach to the bottom of groove
of chain looper arm closely.
19
by loosen screw (1).
Loosen screw (3) can take off front needle guard (4).
Loosen set screw (1) can take off rear chain
stitch needle guard (2). Loosen set screw (3) can
h needle guard (4).
Changing chain stitch looper
Changing the chain looper by
loosen screw (1). When
ing, please make sure the
crank of chain looper must
attach to the bottom of groove
of chain looper arm closely.
www.garudan.cz