Garudan GF-140 Series, User Manual

Page: 10 / 43

© ANITA
MP04300EN_200610 GF-140, GF-240 Series 10
D2. WINDING THE LOWER THREAD ON THE BOBBIN
1. Pass the thread through (1) – (4), and wind several times around the bobbin, which is
set up to the shaft of bobbin winder.
2. Press the lever (5) in direction of the arrow then the bobbin winds the thread
automatically in engage with the operation of the machine.
3. The winding will stop automatically after the bobbin is filled with thread.
D3. REMOVING AND INSERTING THE BOBBIN
1. Draw back the side plate (1) on the bed of the machine and raise the hinged latch (2) to
a vertical position, then you can remove and insert the bobbin.
2. Insert the bobbin and pull the thread out about 4-5 cm (3), then push down the hinged
latch (2) and draw the thread end under the tension spring (4).
3. When closing the side plate (1), leave just enough space for the thread to pass through.
www.garudan.cz